tmh audio
Email: info@tmhaudio.com
Tel: 937-439-2667
tmh audio
Email: info@tmhaudio.com
Tel: 937-439-2667

AirTech Cable Brochure - PDF

ULTRA-HIGH End Cables
Designed & Handcrafted in Italy
Featuring OCC Copper Conductors
--- A part of the Audio Analogue group ---

Tech Features

    • OCC Copper
    • Teflon insulation
    • Rhodium-over-pure copper Connectors ("Air" & selected "Evo")
    • Airtech proprietary DUALPROP balanced geometry
    • CRYO Treated
    • S.R.C. Demagnetized treatment
    • Airtech 5N solder with high copper and silver percentage


S.R.C technology

S.R.C. is “sfasamento a rotazione controllata” which can be translated as “phase displacement controlled rotation” that is
a magnetic-induction electronic treatment, property of Airtech.

It works primarily on the molecular grid of copper with the permanent result of cable’s conduction factor increase and achieve greater linearity of the signal transmission and better transient response thus strongly improving the dynamic range, leaving unchanged the signal passing, thanks to removing all the alterations due to the conductor thus allowing a perfect reproduction of the original signal.

AIR Series                                    EVO Series

"EVO" Series Cables

·
EVO RCA interconnect cable: 22AWG Airtech copper conductor 7N OCC with Teflon insulation, pure copper rhodium plated Airtech RCA connector, Airtech proprietary DUALPROP semi-balanced geometry with S.R.C. Cryo-demagnetized treatment, soldered with Airtech 5N solder with high copper and silver percentage.

· EVO XLR interconnect cable: 22AWG Airtech copper conductor 7N OCC with Teflon insulation, pure copper Airtech XLR connectors with rhodium plated contacts, Airtech proprietary DUALPROP balanced geometry with S.R.C. Cryo-demagnetized treatment, soldered with Airtech 5N solder with high copper and silver percentage.

· EVO Speakers cable: 14AWG and 16AWG Airtech copper conductor 7N OCC with Teflon insulation, pure copper, gold plated Furutech spades or bananas , Airtech proprietary bi-axial geometry with S.R.C. Cryo demagnetized treatment, soldered with Airtech 5N solder with high copper and silver percentage.

· EVO AC Power cable: 14AWG Airtech copper conductor 7N OCC with PVC insulation, Airtech gold plated contacts & aluminum/carbon housing, Airtech proprietary DUALPROP geometry with S.R.C. Cryo-demagnetized treatment.

EVO Series
INTERCONNECTS 1m 1.5m Addtl 0.5m
  RCA/XLR 1600 1800 200
   
SPEAKER CABLES 2m 3m Addtl 0.5m
Banana/Spade 2000 2700 350
 
AC POWER 1.0m 1.5m Addtl 0.5m
Gold connectors 1300 1450 150

· AIR RCA interconnect cable: 20AWG Airtech copper conductor 7N OCC with Teflon insulation, pure copper rhodium plated Airtech RCA connector, Airtech proprietary DUALPROP semi-balanced geometry with S.R.C. Cryo-demagnetized treatment, soldered with Airtech 5N solder with high copper and silver percentage.

· AIR XLR interconnect cable: 20AWG Airtech copper conductor 7N OCC with Teflon insulation, pure copper Airtech XLR connectors with rhodium plated contacts, Airtech proprietary DUALPROP balanced geometry with S.R.C. Cryo-demagnetized treatment, soldered with Airtech 5N solder with high copper and silver percentage.

· AIR Speaker cable: 12 AWG and 14AWG Airtech copper conductor 7N OCC with Teflon insulation, pure copper, rhodium plated pure copper Furutech spades or bananas, Airtech proprietary bi-axial geometry with S.R.C. Cryo-demagnetized treatment, soldered with Airtech 5N solder with high copper and silver percentage.

· AIR AC Power cable: 12AWG Airtech copper conductor 7N OCC with PVC insulation, Airtech rhodium plated contacts aluminum/carbon housing, Airtech proprietary DUALPROP geometry with S.R.C. Cryo-demagnetized treatment.


AirTech "AIR" cables - a few words of appreciation
Owner Review (erik)
https://www.audioasylum.com/audio/cables/messages/17/178188.html


After having them for 2 years, I am ready to share. I'm going to rave about cables that nobody's aware of. They are called AirTech, mine are from their Air line. Now, AirTech is a division of Italian Audio Analogue, which is known for their electronics, and I never knew they're into cablings too until I saw them in Italy a couple of years ago.

So I went to this little audio store and saw very plain looking cables connected between the solid state Mac gear and large Sonus Faber speakers. The sound was extremely enjoyable, open and transparent, just right . I heard Macs with SF before, and never was impressed. Immediately suspected the cables had something to do with this great sound. I was very curious since my BAT vk255se amp was always kind of soft on the attacks and energetic music. I explained to the guy that I had a little problem with my gear, and he, without even thinking recommended those unknown to me cables, which as you probably guessed were from AirTech.

I was very hesitant, since they were expensive and plain looking, but the sales guy did an unbelievable thing - he offered a 1 month return option (shipping on me). With little to lose, got a pair of balanced interconnects and speaker cables. Got their VAT refund at the airport.

So couldn't wait to get back to the US and try them.

Folks, honestly I've never heard such a sound transformation because of the cablings.
The music became more focused, the low bass is just the way I always wanted, articulate, well controlled and the highs more extended, yet very smooth. My jaw just dropped, couldn't believe my ears. Tried different cables to make sure it's not a placebo effect, but no, cables were great.

Now I have had them for two years, and every time I listen to them I feel happy that I was at the right place at the right time when I bought them.

AIR Series
INTERCONNECTS 1m 1.5m Addtl 0.5m
  RCA/XLR 2700 3000 300
   
SPEAKER CABLES 2m 3m Addtl 0.5m
Banana/Spade 3700 4800 550
 
AC POWER 1.0m 1.5m Addtl 0.5m
Rhodium connectors 1650 1900 250

"AIR" SERIES CABLES